Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 12.501 SLD 5
SINGLE LINK AND PERFECT POWER TO WEIGHT RATIO OFFER EFFICIENT LOAD HANDLING
- More power on the hook due to Single Link
- Higher payloads due to intelligent lightweight design
- Maximum reliability due to PALTRONIC
- High degree of user-friendliness thanks to optional radio remote control
- More lifting power due to A-HPLS
Max. lifting moment | 11.4 |
Max. lifting capacity | 5700 |
Max. hydraulic outreach | 12.0 |
Max. manual outreach | 15.9 |
Slewing angle | 400° |
Slewing torque | 1.3 |
Stabilizer spread (std) | 3.3 m |
Fitting space required (std) | 0.72 |
Max. operating pressure | 360 |
Pump capacity | 45 - 60 l/min |
Dead weight (std.) | 1170 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment | Outreach | Slewing angle | Slewing torque (mt) | Pressure | Pump capacity (l/min) | Crane Weight | Crane Height | Crane Width | Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Std | 11.4 mt | 5.8 m | 400 | 1.3 | 36.0 Mpa | 45-60 | 1170 kg | 2110 mm | 2400 mm | 720 mm | 5600 mm | - | 2050 kg |
A | 11.1 mt | 7.8 m | 400 | 1.3 | 36.0 Mpa | 45-60 | 1280 kg | 2110 mm | 2400 mm | 720 mm | 7600 mm | - | 1440 kg |
B | 10.8 mt | 9.9 m | 400 | 1.3 | 36.0 Mpa | 45-60 | 1380 kg | 2110 mm | 2400 mm | 720 mm | 9800 mm | - | 1040 kg |
C | 10.5 mt | 12.0 m | 400 | 1.3 | 36.0 Mpa | 45-60 | 1480 kg | 2110 mm | 2400 mm | 720 mm | 11900 mm | - | 950 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.